ANSI, ASME, ASA, B16.5 SOCKET WELD FLANGE
KLASSE 150/300/600/1500
Flange Ofmjittings & Approximate Massen
| ANSI, ASME, ASA B16.5 150lb/sq.in.SOCKET WELD FLANGE RF | |||||||||||||
| Nominale Grutte |
| Bûten Diam. | Dik.van Flange | Diam.fan Raised Face | Diam fan Hub by Base | Length Thru Hub | Diam.fan Bore | Djipte fan Socket | Oantal gatten | Diam.fan Holes | Diam.fan Bolts | Diam.fan Bolt Circle | Ca.Gewicht Pûn Kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2" | yn. | 3.5 | 0.44 | 1.38 | 1.19 | 0.62 | 0.88 | 0.38 | 4 | 0.62 | 1/2 | 2.38 | 1 |
| mm. | 88,9 | 11.2 | 35.1 | 30.2 | 15.7 | 22.4 | 9.7 | 15.7 | 12.7 | 60,5 | 0.5 | ||
| 3/4" | yn. | 3.88 | 0.5 | 1.69 | 1.5 | 0.62 | 1.09 | 0.44 | 4 | 0.62 | 1/2 | 2.75 | 2 |
| mm. | 98,6 | 12.7 | 42.9 | 38.1 | 15.7 | 27.7 | 11.2 | 15.7 | 12.7 | 69,9 | 1 | ||
| 1" | yn. | 4.25 | 0.56 | 2 | 1.94 | 0.69 | 1.36 | 0.5 | 4 | 0.62 | 1/2 | 3.12 | 2 |
| mm. | 108 | 14.2 | 50,8 | 49,3 | 17.5 | 34.5 | 12.7 | 15.7 | 12.7 | 79.2 | 1 | ||
| 1 1/4" | yn. | 4.62 | 0.62 | 2.5 | 2.31 | 0.81 | 1.7 | 0.56 | 4 | 0.62 | 1/2 | 3.5 | 3 |
| mm. | 117.3 | 15.7 | 63,5 | 58.7 | 20.6 | 43.2 | 14.2 | 15.7 | 12.7 | 88,9 | 1 | ||
| 1 1/2" | yn. | 5 | 0.69 | 2.88 | 2.56 | 0.88 | 1.95 | 0.62 | 4 | 0.62 | 1/2 | 3.88 | 3 |
| mm. | 127 | 17.5 | 73.2 | 65 | 22.4 | 49,5 | 15.7 | 15.7 | 12.7 | 98,6 | 1 | ||
| 2" | yn. | 6 | 0,75 | 3.62 | 3.06 | 1 | 2.44 | 0.69 | 4 | 0,75 | 5/8 | 4.75 | 5 |
| mm. | 152.4 | 19.1 | 91.9 | 77,7 | 25.4 | 62 | 17.5 | 19.1 | 15.9 | 120,7 | 2 | ||
| 2 1/2" | yn. | 7 | 0.88 | 4.12 | 3.56 | 1.12 | 2.94 | 0,75 | 4 | 0,75 | 5/8 | 5.5 | 7 |
| mm. | 177,8 | 22.4 | 104.6 | 90,4 | 28.4 | 74.7 | 19.1 | 19.1 | 15.9 | 139,7 | 3 | ||
| 3" | yn. | 7.5 | 0.94 | 5 | 4.25 | 1.19 | 3.57 | 0.81 | 4 | 0,75 | 5/8 | 6 | 8 |
| mm. | 190,5 | 23.9 | 127 | 108 | 30.2 | 90,7 | 20.6 | 19.1 | 15.9 | 152.4 | 4 | ||
| 3 1/2" | yn. | 8.5 | 0.94 | 5.5 | 4.81 | 1.25 | 4.07 |
| 8 | 0,75 | 5/8 | 7 | 11 |
| mm. | 215,9 | 23.9 | 139,7 | 122.2 | 31.8 | 103.4 |
| 19.1 | 15.9 | 177,8 | 5 | ||
| 4" | yn. | 9 | 0.94 | 6.19 | 5.31 | 1.31 | 4.57 |
| 8 | 0,75 | 5/8 | 7.5 | 13 |
| mm. | 228,6 | 23.9 | 157.2 | 134,9 | 33.3 | 116.1 |
| 19.1 | 15.9 | 190,5 | 6 | ||
| 5" | yn. | 10 | 0.94 | 7.31 | 6.44 | 1.44 | 5.66 |
| 8 | 0.88 | 3/4 | 8.5 | 15 |
| mm. | 254 | 23.9 | 185,7 | 163,6 | 36.6 | 143,8 |
| 22.4 | 19.1 | 215,9 | 7 | ||
| 6" | yn. | 11 | 1 | 8.5 | 7.56 | 1.56 | 6.72 |
| 8 | 0.88 | 3/4 | 9.5 | 19 |
| mm. | 279,4 | 25.4 | 215,9 | 192 | 39.6 | 170,7 |
| 22.4 | 19.1 | 241,3 | 9 | ||
| 8" | yn. | 13.5 | 1.12 | 10.62 | 9.69 | 1.75 | 8.72 |
| 8 | 0.88 | 3/4 | 11.75 | 30 |
| mm. | 342,9 | 28.4 | 269,7 | 246.1 | 44,5 | 221,5 |
| 22.4 | 19.1 | 298,5 | 14 | ||
| 10" | yn. | 16 | 1.19 | 12.75 | 12 | 1.94 | 10.88 |
| 12 | 1 | 7/8 | 14.25 | 43 |
| mm. | 406.4 | 30.2 | 323,9 | 304.8 | 49,3 | 276,4 |
| 25.4 | 22.2 | 362 | 20 | ||
| 12" | yn. | 19 | 1.25 | 15 | 14.38 | 2.19 | 12.88 |
| 12 | 1 | 7/8 | 17 | 64 |
| mm. | 482,6 | 31.8 | 381 | 365,3 | 55.6 | 327,2 |
| 25.4 | 22.2 | 431,8 | 29 | ||
| 14" | yn. | 21 | 1.38 | 16.25 | 15.75 | 2.25 | 14.14 |
| 12 | 1.12 | 1 | 18.75 | 90 |
| mm. | 533,4 | 35.1 | 412.8 | 400.1 | 57.2 | 359,2 |
| 28.4 | 25.4 | 476,3 | 41 | ||
| 16" | yn. | 23.5 | 1.44 | 18.5 | 18 | 2.5 | 16.16 |
| 16 | 1.12 | 1 | 21.25 | 98 |
| mm. | 596,9 | 36.6 | 469,9 | 457,2 | 63,5 | 410,5 |
| 28.4 | 25.4 | 539,8 | 44 | ||
| 18" | yn. | 25 | 1.56 | 21 | 19.88 | 2.69 | 18.18 |
| 16 | 1.25 | 1 1/8 | 22.75 | 130 |
| mm. | 635 | 39.6 | 533,4 | 505 | 68.3 | 461,8 |
| 31.8 | 28.6 | 577,9 | 59 | ||
| 20" | yn. | 27.5 | 1.69 | 23 | 22 | 2.88 | 20.2 |
| 20 | 1.25 | 1 1/8 | 25 | 165 |
| mm. | 698,5 | 42.9 | 584.2 | 558,8 | 73.2 | 513.1 |
| 31.8 | 28.6 | 635 | 75 | ||
| 24" | yn. | 32 | 1.88 | 27.25 | 26.12 | 3.25 | 24.25 |
| 20 | 1.38 | 1 1/4 | 29.5 | 220 |
| mm. | 812.8 | 47.8 | 692.2 | 663,4 | 82.6 | 616 |
| 35.1 | 31.8 | 749,3 | 100 | ||
NOAT:
(1) Wannear't dizze flanges binne nedich mei platte gesicht, itsij de folsleine dikte of dikte mei ferhege gesicht fuorthelle kin wurde ynrjochte.
Brûkers wurde herinnere dat it fuortheljen fan it ferhege gesicht sil meitsje de lingte troch hub nonstandard.
(2) Dizze diminsje is foar grutte ein fan hub, dat kin wêze rjocht of tapered.threaded, slip-on, socket welding, en lapped flanges.
(3) Socket Weld Flens Bore Grutte SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS.
| ANSI, ASME, ASA B16.5 300lb/sq.in.SOCKET WELD FLANGE RF | |||||||||||||
| Nominale Grutte |
| Bûten Diam. | Dik.van Flange | Diam.fan Raised Face | Diam fan Hub by Base | Length Thru Hub | Diam.fan Bore | Djipte fan Socket | Oantal gatten | Diam.fan Holes | Diam.fan Bolts | Diam.fan Bolt Circle | Ca.Gewicht Pûn Kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2" | yn. | 3.75 | 0.56 | 1.38 | 1.5 | 0.88 | 0.88 | 0.38 | 4 | 0.62 | 1/2 | 2.62 | 2 |
| mm. | 95,3 | 14.2 | 35.1 | 38.1 | 22.4 | 22.4 | 9.7 | 15.7 | 12.7 | 66,5 | 1 | ||
| 3/4" | yn. | 4.62 | 0.62 | 1.69 | 1.88 | 1 | 1.09 | 0.44 | 4 | 0,75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47.8 | 25.4 | 27.7 | 11.2 | 19.1 | 15.9 | 82.6 | 1 | ||
| 1" | yn. | 4.88 | 0.69 | 2 | 2.12 | 1.06 | 1.36 | 0.5 | 4 | 0,75 | 5/8 | 3.5 | 3 |
| mm. | 124 | 17.5 | 50,8 | 53.8 | 26.9 | 34.5 | 12.7 | 19.1 | 15.9 | 88,9 | 1 | ||
| 1 1/4" | yn. | 5.25 | 0,75 | 2.5 | 2.5 | 1.06 | 1.7 | 0.56 | 4 | 0,75 | 5/8 | 3.88 | 4 |
| mm. | 133.4 | 19.1 | 63,5 | 63,5 | 26.9 | 43.2 | 14.2 | 19.1 | 15.9 | 98,6 | 2 | ||
| 1 1/2" | yn. | 6.12 | 0.81 | 2.88 | 2.75 | 1.19 | 1.95 | 0.62 | 4 | 0.88 | 3/4 | 4.5 | 6 |
| mm. | 155,4 | 20.6 | 73.2 | 69,9 | 30.2 | 49,5 | 15.7 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2" | yn. | 6.5 | 0.88 | 3.62 | 3.31 | 1.31 | 2.44 | 0.69 | 8 | 0,75 | 5/8 | 5 | 7 |
| mm. | 165.1 | 22.4 | 91.9 | 84.1 | 33.3 | 62 | 17.5 | 19.1 | 15.9 | 127 | 3 | ||
| 2 1/2" | yn. | 7.5 | 1 | 4.12 | 3.94 | 1.5 | 2.94 | 0,75 | 8 | 0.88 | 3/4 | 5.88 | 10 |
| mm. | 190,5 | 25.4 | 104.6 | 100.1 | 38.1 | 74.7 | 19.1 | 22.4 | 19.1 | 149,4 | 5 | ||
| 3" | yn. | 8.25 | 1.12 | 5 | 4.62 | 1.69 | 3.57 | 0.81 | 8 | 0.88 | 3/4 | 6.62 | 13 |
| mm. | 209.6 | 28.4 | 127 | 117.3 | 42.9 | 90,7 | 20.6 | 22.4 | 19.1 | 168.1 | 6 | ||
| 3 1/2" | yn. | 9 | 1.19 | 5.5 | 5.25 | 1.75 | 4.07 |
| 8 | 0.88 | 3/4 | 7.25 | 17 |
| mm. | 228,6 | 30.2 | 139,7 | 133.4 | 44,5 | 103.4 |
| 22.4 | 19.1 | 184.2 | 8 | ||
| 4" | yn. | 10 | 1.25 | 6.19 | 5.75 | 1.88 | 4.57 |
| 8 | 0.88 | 3/4 | 7.88 | 22 |
| mm. | 254 | 31.8 | 157.2 | 146.1 | 47.8 | 116.1 |
| 22.4 | 19.1 | 200.2 | 10 | ||
| 5" | yn. | 11 | 1.38 | 7.31 | 7 | 2 | 5.66 |
| 8 | 0.88 | 3/4 | 9.25 | 28 |
| mm. | 279,4 | 35.1 | 185,7 | 177,8 | 50,8 | 143,8 |
| 22.4 | 19.1 | 235 | 13 | ||
| 6" | yn. | 12.5 | 1.44 | 8.5 | 8.12 | 2.06 | 6.72 |
| 12 | 0.88 | 3/4 | 10.62 | 39 |
| mm. | 317,5 | 36.6 | 215,9 | 206.2 | 52.3 | 170,7 |
| 22.4 | 19.1 | 269,7 | 18 | ||
| 8" | yn. | 15 | 1.62 | 10.62 | 10.25 | 2.44 | 8.72 |
| 12 | 1 | 7/8 | 13 | 58 |
| mm. | 381 | 41.1 | 269,7 | 260,4 | 62 | 221,5 |
| 25.4 | 22.2 | 330,2 | 26 | ||
| 10" | yn. | 17.5 | 1.88 | 12.75 | 12.62 | 2.62 | 10.88 |
| 16 | 1.12 | 1 | 15.25 | 81 |
| mm. | 444,5 | 47.8 | 323,9 | 320,5 | 66,5 | 276,4 |
| 28.4 | 25.4 | 387,4 | 37 | ||
| 12" | yn. | 20.5 | 2 | 15 | 14.75 | 2.88 | 12.88 |
| 16 | 1.25 | 1 1/8 | 17.75 | 115 |
| mm. | 520,7 | 50,8 | 381 | 374,7 | 73.2 | 327,2 |
| 31.8 | 28.6 | 450,9 | 52 | ||
| 14" | yn. | 23 | 2.12 | 16.25 | 16.75 | 3 | 14.14 |
| 20 | 1.25 | 1 1/8 | 20.25 | 165 |
| mm. | 584.2 | 53.8 | 412.8 | 425,5 | 76.2 | 359,2 |
| 31.8 | 28.6 | 514.4 | 75 | ||
| 16" | yn. | 25.5 | 2.25 | 18.5 | 19 | 3.25 | 16.16 |
| 20 | 1.38 | 1 1/4 | 22.5 | 190 |
| mm. | 647,7 | 57.2 | 469,9 | 482,6 | 82.6 | 410,5 |
| 35.1 | 31.8 | 571,5 | 86 | ||
| 18" | yn. | 28 | 2.38 | 21 | 21 | 3.5 | 18.18 |
| 24 | 1.38 | 1 1/4 | 24.75 | 250 |
| mm. | 711.2 | 60,5 | 533,4 | 533,4 | 88,9 | 461,8 |
| 35.1 | 31.8 | 628,7 | 113 | ||
| 20" | yn. | 30.5 | 2.5 | 23 | 23.12 | 3.75 | 20.2 |
| 24 | 1.38 | 1 1/4 | 27 | 315 |
| mm. | 774,7 | 63,5 | 584.2 | 587.2 | 95,3 | 513.1 |
| 35.1 | 31.8 | 685,8 | 143 | ||
| 24" | yn. | 36 | 2.75 | 27.25 | 27.62 | 4.19 | 24.25 |
| 24 | 1.62 | 1 1/2 | 32 | 475 |
| mm. | 914.4 | 69,9 | 692.2 | 701,5 | 106.4 | 616 |
| 41.1 | 38.1 | 812.8 | 215 | ||
| ANSI, ASME, ASA B16.5 600lb/sq.in.SOCKET WELD FLANGE RF | |||||||||||||
| Nominale Grutte |
| Bûten Diam. | Dik.van Flange | Diam.fan Raised Face | Diam fan Hub by Base | Length Thru Hub | Diam.fan Bore | Djipte fan Socket | Oantal gatten | Diam.fan Holes | Diam.fan Bolts | Diam.fan Bolt Circle | Ca.Gewicht Pûn Kg |
| O | C | R | X | Y | B | D | |||||||
| 1/2" | yn. | 3.75 | 0.56 | 1.38 | 1.5 | 0.88 | 0.88 | 0.38 | 4 | 0.62 | 1/2 | 2.62 | 2 |
| mm. | 95,3 | 14.2 | 35.1 | 38.1 | 22.4 | 22.4 | 9.7 | 15.7 | 12.7 | 66,5 | 1 | ||
| 3/4" | yn. | 4.62 | 0.62 | 1.69 | 1.88 | 1 | 1.09 | 0.44 | 4 | 0,75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 42.9 | 47.8 | 25.4 | 27.7 | 11.2 | 19.1 | 15.9 | 82.6 | 1 | ||
| 1" | yn. | 4.88 | 0.69 | 2 | 2.12 | 1.06 | 1.36 | 0.5 | 4 | 0,75 | 5/8 | 3.5 | 4 |
| mm. | 124 | 17.5 | 50,8 | 53.8 | 26.9 | 34.5 | 12.7 | 19.1 | 15.9 | 88,9 | 2 | ||
| 1 1/4" | yn. | 5.25 | 0.81 | 2.5 | 2.5 | 1.12 | 1.7 | 0.56 | 4 | 0,75 | 5/8 | 3.88 | 5 |
| mm. | 133.4 | 20.6 | 63,5 | 63,5 | 28.4 | 43.2 | 14.2 | 19.1 | 15.9 | 98,6 | 2 | ||
| 1 1/2" | yn. | 6.12 | 0.88 | 2.88 | 2.75 | 1.25 | 1.95 | 0.62 | 4 | 0.88 | 3/4 | 4.5 | 7 |
| mm. | 155,4 | 22.4 | 73.2 | 69,9 | 31.8 | 49,5 | 15.7 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2" | yn. | 6.5 | 1 | 3.62 | 3.31 | 1.44 | 2.44 | 0.69 | 8 | 0,75 | 5/8 | 5 | 9 |
| mm. | 165.1 | 25.4 | 91.9 | 84.1 | 36.6 | 62 | 17.5 | 19.1 | 15.9 | 127 | 4 | ||
| 2 1/2" | yn. | 7.5 | 1.12 | 4.12 | 3.94 | 1.62 | 2.94 | 0,75 | 8 | 0.88 | 3/4 | 5.88 | 13 |
| mm. | 190,5 | 28.4 | 104.6 | 100.1 | 41.1 | 74.7 | 19.1 | 22.4 | 19.1 | 149,4 | 6 | ||
| 3" | yn. | 8.25 | 1.25 | 5 | 4.62 | 1.81 | 3.57 | 0.81 | 8 | 0.88 | 3/4 | 6.62 | 16 |
| mm. | 209.6 | 31.8 | 127 | 117.3 | 46 | 90,7 | 20.6 | 22.4 | 19.1 | 168.1 | 7 | ||
| 3 1/2" | yn. | 9 | 1.38 | 5.5 | 5.25 | 1.94 | 4.07 |
| 8 | 1 | 7/8 | 7.25 | 21 |
| mm. | 228,6 | 35.1 | 139,7 | 133.4 | 49,3 | 103.4 |
| 25.4 | 22.2 | 184.2 | 10 | ||
| 4" | yn. | 10.75 | 1.5 | 6.19 | 6 | 2.12 | 4.57 |
| 8 | 1 | 7/8 | 8.5 | 37 |
| mm. | 273.1 | 38.1 | 157.2 | 152.4 | 53.8 | 116.1 |
| 25.4 | 22.2 | 215,9 | 17 | ||
| 5" | yn. | 13 | 1.75 | 7.31 | 7.44 | 2.38 | 5.66 |
| 8 | 1.12 | 1 | 10.5 | 63 |
| mm. | 330,2 | 44,5 | 185,7 | 189 | 60,5 | 143,8 |
| 28.4 | 25.4 | 266,7 | 29 | ||
| 6" | yn. | 14 | 1.88 | 8.5 | 8.75 | 2.62 | 6.72 |
| 12 | 1.12 | 1 | 11.5 | 80 |
| mm. | 355,6 | 47.8 | 215,9 | 222,3 | 66,5 | 170,7 |
| 28.4 | 25.4 | 292.1 | 36 | ||
| 8" | yn. | 16.5 | 2.19 | 10.62 | 10.75 | 3 | 8.72 |
| 12 | 1.25 | 1 1/8 | 13.75 | 115 |
| mm. | 419.1 | 55.6 | 269,7 | 273.1 | 76.2 | 221,5 |
| 31.8 | 28.6 | 349,3 | 52 | ||
| 10" | yn. | 20 | 2.5 | 12.75 | 13.5 | 3.38 | 10.88 |
| 16 | 1.38 | 1 1/4 | 17 | 170 |
| mm. | 508 | 63,5 | 323,9 | 342,9 | 85,9 | 276,4 |
| 35.1 | 31.8 | 431,8 | 77 | ||
| 12" | yn. | 22 | 2.62 | 15 | 15.75 | 3.62 | 12.88 |
| 20 | 1.38 | 1 1/4 | 19.25 | 200 |
| mm. | 558,8 | 66,5 | 381 | 400.1 | 91.9 | 327,2 |
| 35.1 | 31.8 | 489 | 91 | ||
| 14" | yn. | 23.75 | 2.75 | 16.25 | 17 | 3.69 | 14.14 |
| 20 | 1.5 | 1 3/8 | 20.75 | 230 |
| mm. | 603.3 | 69,9 | 412.8 | 431,8 | 93.7 | 359,2 |
| 38.1 | 34.9 | 527.1 | 104 | ||
| 16" | yn. | 27 | 3 | 18.5 | 19.5 | 4.19 | 16.16 |
| 20 | 1.62 | 1 1/2 | 23.75 | 330 |
| mm. | 685,8 | 76.2 | 469,9 | 495,3 | 106.4 | 410,5 |
| 41.1 | 38.1 | 603.3 | 150 | ||
| 18" | yn. | 29.25 | 3.25 | 21 | 21.5 | 4.62 | 18.18 |
| 20 | 1.75 | 1 5/8 | 25.75 | 400 |
| mm. | 743 | 82.6 | 533,4 | 546.1 | 117.3 | 461,8 |
| 44,5 | 41.3 | 654.1 | 181 | ||
| 20" | yn. | 32 | 3.5 | 23 | 24 | 5 | 20.2 |
| 24 | 1.75 | 1 5/8 | 28.5 | 510 |
| mm. | 812.8 | 88,9 | 584.2 | 609,6 | 127 | 513.1 |
| 44,5 | 41.3 | 723,9 | 231 | ||
| 24" | yn. | 37 | 4 | 27.25 | 28.25 | 5.5 | 24.25 |
| 24 | 2 | 1 7/8 | 33 | 730 |
| mm. | 939,8 | 101.6 | 692.2 | 717,6 | 139,7 | 616 |
| 50,8 | 47,6 | 838.2 | 331 | ||
Production Kapasiteit & Purchase Details
1. Supply Flange Dimension DN15 - DN2000 (1/2" - 80"), Forged Flange.
2. Materiaal Carbon Steel: ASTM A105, A181, A350 LF1, A350LF2, A350LF3, A36, A234 WPB, Q235B, 20#, 20Mn ensfh.
3. Materiaal RVS: ASTM A182 F304, F304L, F316, F316L, F321 ensfh.
4. Flanges Anti Rust: Anti Rust Oil, Black Paint, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized etc.
5. Monthly Output: 3000 ton per måned.
6. Leveringsbetingsten: CIF, CFR, FOB, EXW.
7. Payment Terms: Wire Transfer (T / T), Irrevocable L / C at Sight etc.
8. Minimum Order Quantity: 1Ton of 100Pcs.
9. Kwaliteitsgarantie: EN10204 3.1 Certificate, Mill Certificate, Third Party Inspection, Free Replacement Service.
10. Find More Requirements In Flanges Market.