DIN 2642 PN10 LOSSE FLENS
LAPPED FLANGE
Flange Ofmjittings & Approximate Massen
| Dútslân standert flange DIN 2642 lapped flange;nominale druk 10 | |||||||||||
| Lose Flansche Vorschweßbördel Glatte Bunde DIN 2642 Nenndruck 10 | |||||||||||
| Brides tournantes: nominale druk 10 | |||||||||||
| Piip | Flens | Screws | Gewicht | ||||||||
| Rated | d1 | D | d6 | b | k | e | Holes | Thread | d2 | Kg | |
| ISO | DIN | ||||||||||
| 15 | - | 20 | 95 | 22 | 14 | 65 | 3 | 4 | M 12 | 14 | 0.689 |
| 21,3 | - | 24 | |||||||||
| 20 | - | 25 | 105 | 28 | 14 | 75 | 3 | 4 | M 12 | 14 | 0,806 |
| 26,9 | - | 30 | |||||||||
| 25 | - | 30 | 115 | 33 | 16 | 85 | 4 | 4 | M 12 | 14 | 1,11 |
| 33,7 | - | 36 | |||||||||
| 32 | - | 38 | 140 | 42 | 16 | 100 | 4 | 4 | M 16 | 18 | 1,64 |
| 42,4 | - | 46 | |||||||||
| 40 | - | 44,5 | 150 | 50 | 16 | 110 | 4 | 4 | M 16 | 18 | 1,86 |
| 48,3 | - | 54 | |||||||||
| 50 | - | 57 | 165 | 62 | 16 | 125 | 5 | 4 | M 16 | 18 | 2,20 |
| 60,3 | - | 65 | |||||||||
| 65 | 76,1 | - | 185 | 81 | 16 | 145 | 5 | 4 | M 16 | 18 | 2,62 |
| 80 | 88,9 | - | 200 | 94 | 18 | 160 | 5 | 8 | M 16 | 18 | 3,32 |
| 100 | - | 108 | 220 | 113 | 18 | 180 | 5 | 8 | M 16 | 18 | 3,67 |
| 114,3 | - | 119 | |||||||||
| 125 | - | 133 | 250 | 138 | 18 | 210 | 5 | 8 | M 16 | 18 | 4,54 |
| 139,7 | - | 145 | |||||||||
| 150 | - | 159 | 285 | 164 | 18 | 240 | 5 | 8 | M 20 | 22 | 5,60 |
| 168,3 | - | 173 | |||||||||
| 200 | 219,1 | - | 340 | 225 | 20 | 295 | 5 | 8 | M 20 | 22 | 7,46 |
| 250 | - | 267 | 395 | 273 | 22 | 350 | 5 | 12 | M 20 | 22 | 10,30 |
| 273 | - | 279 | |||||||||
| 300 | 323,9 | - | 445 | 329 | 26 | 400 | 5 | 12 | M 20 | 22 | 14.00 |
| 350 | 355,6 | - | 505 | 362 | 28 | 460 | 6 | 16 | M 20 | 22 | 18,50 |
| - | 368 | 374 | |||||||||
| 400 | 406,4 | - | 565 | 413 | 32 | 515 | 6 | 16 | M 24 | 26 | 25.00 |
| - | 419 | 426 | |||||||||
| (450) | 457 | - | 615 | 467 | 38 | 565 | 6 | 20 | M 24 | 26 | 30,60 |
| 500 | 508 | - | 670 | 517 | 38 | 620 | 6 | 20 | M 24 | 26 | 37.00 |
| 600 | 610 | - | 780 | 618 | 44 | 725 | 7 | 20 | M 27 | 30 | 56,30 |
| 700 | 711 | - | 895 | 721 | 50 | 840 | 7 | 24 | M 27 | 30 | 80,40 |
| 800 | 813 | - | 1015 | 824 | 56 | 950 | 7 | 24 | M 30 | 33 | 113,20 |
NOAT:
1. Gevel neffens DIN 2526
Plat gesicht:
Form A, Face sûnder easken
Form B, Face Rz = 160, machined (net glêdder dan 40µm)
Ferhege gesicht:
Form C, Face Rz = 160, machined (net glêdder dan 40µm)
Form D, Face Rz = 40, machined
Form E, Face Rz = 16, machined
2. Tong en groef neffens DIN 2512
Form F, Tongue
Form N, Groove
3. Manlik en froulik neffens DIN 2513, DIN 2514
Form V13, V14, Male
Form R13, R16, Female
4. Chemfering foar diafragma-weldpakkingen, PN64-PN400, neffens DIN 2695
5. Facing foar lensfoarmige gewrichten, PN64-PN400, neffens DIN 2696
Production Kapasiteit & Purchase Details
1. Supply Flange Dimension DN15 - DN2000 (1/2" - 80"), Forged Flange.
2. Materiaal koalstofstiel: RST37.2, C22.8, S235JR, ST37, P235GH, P245GH, P250GH, ASTM A105
3. Materiaal RVS: ASTM A182 F304, F304L, F316, F316L, F321 ensfh.
4. Flanges Anti Rust: Anti Rust Oil, Black Paint, Yellow Paint Coating, Hot Dipped Galvanized, Cold Galvanized etc.
5. Monthly Output: 3000 ton per måned.
6. Leveringsbetingsten: CIF, CFR, FOB, EXW.
7. Payment Terms: Wire Transfer (T / T), Irrevocable L / C at Sight etc.
8. Minimum Order Quantity: 1Ton of 100Pcs.
9. Kwaliteitsgarantie: EN10204 3.1 Certificate, Mill Certificate, Third Party Inspection, Free Replacement Service.
10. Find More Requirements In Flanges Market.